Control Pro 130 Product Support

These materials are best suited for the Control Pro 130

*Smaller Tip Recommended

T

Here are the High Efficiency Airless (HEA) tips you should use with your sprayer for various coatings and desired pattern width

COATINGS	TIP #	PATTERN WIDTH	COMPATIBILITY
Polyurethane, Water-Based Lacquer, Transparent Stain, Semi-Transparent Stain	211	4-6″
	311	6-8″
Polyurethane, Water-Based Lacquer, Semi-Transparent Stain, Solid Stain	313	6-8″
	413	8-10″
Solid Stain, Water and Oil-Based Paint & Primer	515	10-12″	Included

The 517 and 619 for thicker materials are not compatible with the Control Pro 130.

SPRAY PATTERN	SOLUTIONS
Tailing	Need a larger tip size. If you are already using the largest tip size compatible with the Control Pro 130 (515 tip), you can try to thin the material. For water-based material, use water or Wagner Paint Easy. For oil-based material, use mineral spirits. Always follow the manufacturer’s recommendations for thinning.
Runs & Sags	Spray gun is too close to the surface. Take a step back and hold it about 10-12″ away.	Moving too slow. Move faster while remaining steady.
Overspray & Poor Coverage	Spray gun is too far from the surface. Take a step closer and hold it about 10-12″ away.	Moving too fast. Move slower while remaining steady.
Good Spray Pattern	Pressure is well balanced, spray gun is 10-12″ away from the surface and is moving at a steady speed.