Site Search

What is the difference between an airless sprayer and an HVLP sprayer?

Airless Sprayers atomize coatings by forcing the product through a small tip opening at very high fluid pressure. The fluid pressures are commonly between 1200-3300psi, or higher. Airless sprayers are capable of spraying larger surfaces at...

What is the difference between the FLEXiO 570/590 and the FLEXiO 2000/3000?

The main difference between the FLEXiO 570/ 590 and FLEXiO 2000/3000 is the design of the iSpray front end. The new nozzle designed iSpray front end will provide paint control with a uniform and contained pattern. Also, the new paint flow...

What is the difference between the FLEXiO 2500/3500 and the FLEXiO 4000/5000?

The FLEXiO 2500 comes with a convenient on/off switch, a two speed X-Boost turbine, and the iSpray Nozzle. The FLEXiO 3500 comes with a convenient on/off switch,, a nine speed setting X-Boost turbine, the iSpray Nozzle,...

Why does air continuously come out when I turn my sprayer on?

The FLEXiO series, the Earlex 3700 & 5700 and the Control Series sprayers are all bleeder guns. With a bleeder gun air flows continuously; the trigger only starts and stops the paint flow.

What is the nozzle size?

The iSpray Nozzle is 2.5mm. The Detail Finish Nozzle is 1.8mm. Nozzle sizes can not be adjusted.

What is the Detail finish nozzle used for?

The Detail finish nozzle is best used on your fine finish projects such as spraying cabinets, furniture, doors, trim etc. It will provide a smoother, finer finish than the iSpray Nozzle. Depending on your material, the...

What types of coatings can be sprayed through the FLEXiO series?

The FLEXiO series will spray water-based and oil-based coatings. Do not spray or clean with liquids having a flash point of less than 100ºF (38ºC). Flash point is the temperature at which a fluid can produce...

Do I have to thin the material?

This will depend on which front end is being used. If your material will not spray at all or if it spits/splatters it may need thinning. If thinning is necessary, as little as 5% can make...

What should I use to clean my FLEXiO sprayer?

Warm, soapy water for water-based materials; mineral spirits for oil-based materials, along with a soft bristle brush and a rag. Always check the back of the paint container for appropriate cleaning solution. For more information on...

Is the FLEXiO series recommended for indoor and outdoor use?

Yes, it is great for indoor and outdoor projects. The room or area you are spraying must be properly masked in order to prevent overspray from covering woodwork, floors or furnishings. Make sure you have masked...

Can I spray the ceiling with the FLEXiO sprayers?

Yes, you can, but never tip the sprayer upwards at more than a 45-degree angle while using the FLEXiO handheld models. If the sprayer is tipped upwards at more than a 45-degree angle material could get...

Can the FLEXiO series be used with 220volt?

The FLEXiO series designed for the U.S is for use on a 120 Volt circuit. If you need a sprayer for 220volt, you can find a dealer or see our 220volt Wagner version.

Where can I get parts for my FLEXiO series?

Parts can be purchased through online distributors, Wagner online at www.wagnerspraytech.com or by calling us direct at 1-800-328-8251.

What is the warranty on the FLEXiO series?

This Product, Manufactured by Wagner Spray Tech Corporation, is warranted to the original retail purchaser against defects in material and workmanship for one year from the date of purchase if operated in accordance with Wagner’s printed...

What is the difference between the FLEXiO 2000/3000 and the FLEXiO 2500/3500?

The FLEXiO 2000 comes with the iSpray Nozzle, and has a 2 speed switch. The FLEXiO 2500 is an upgraded, compact, lightweight design that makes it easier to handle when spraying. It comes with the iSpray...

What does HEA mean?

HEA stands for High Efficiency Airless which means that the pump will have 55% less overspray than standard airless sprayers.

Can HEA sprayers be used indoors and outdoors?

Yes, the HEA sprayers can be used indoors and outdoors. If spraying indoors the room or area you are spraying must be properly masked in order to prevent overspray from covering woodwork, floors, furnishings, etc… ...

What spray tips are compatible with the HEA sprayers?

Only Wagner and Titan HEA spray tips are compatible with the HEA sprayers.

Can you use extensions with the HEA sprayers?

Yes, you can use Wagner and Titan extension up to 24”.

What is the maximum length of spray hose that I use on the HEA sprayers?

A general rule to follow is that you can double the length of hose that came with your sprayer originally and still expect optimal performance.

Is there a filter and/or swivel available for the HEA sprayers?

Yes, there is a filter/swivel assembly available, the part number is 0580611. Parts can be purchased through online distributors, Wagner online at www.wagnerspraytech.com or by calling us direct at 1-800-328-8251.

Is there a roller attachment available for the HEA sprayers?

Yes, there is a roller attachment available, the part number is 0580299. Parts can be purchased through online distributors, Wagner online at www.wagnerspraytech.com or by calling us direct at 1-800-328-8251.

Where can I get parts or accessories for the HEA sprayers?

Parts can be purchased through online distributors, Wagner online at www.wagnerspraytech.com or by calling us direct at 1-800-328-8251.

What is light household oil?

It’s multipurpose oil that can be used to lubricate the sprayer. Examples are: 3-in-one oil, 10W30 motor oil, vegetable oil, sewing machine oil, or air tool oil.

What types of coatings can be sprayed through the HEA sprayers?

The HEA sprayers will spray water-based and oil-based coatings. Do not spray or clean with liquids having a flash point of less than 100ºF (38ºC). Flash point is the temperature at which a fluid can produce...

Do I need to thin the material?

Transparent and semi-transparent stains should not need to be thinned. If thinning is necessary, as little as 5% can make a big difference. Use water for water-based materials and mineral spirits for oil-based materials. Never exceed...

Can I use a generator with the HEA sprayers?

Yes, you can. The Control Pro 130 uses a 2,500 Watt generator but you must disable the idle-down feature. The Control Pro 150/170/190 uses a 5,000 Watt generator but you must disable the idle-down feature.

Can I use the HEA sprayer to paint my car?

The HEA sprayers are designed for large interior and exterior surfaces like walls, siding, fences, decks and other projects around the home. Therefore, they do not provide an automotive showroom quality finish.

Can the HEA sprayer be used with 220volt?

The HEA series is designed for use with 120volt 60hz current. If you need a sprayer internationally you can find a dealer at this link, https://www.wagner-group.com/en/consumer/service/service-for-consumers/servicenumbers-international/.

Can the HEA sprayers be used with a 5 gallon bucket?

Yes, with the exception of the Control Pro 130 Power Tank that has a 1 ½ gallon hopper. All other Control Pro sprayers can be used with a one or five gallon container.

What is the warranty on the HEA sprayers?

This Product, Manufactured by Wagner Spray Tech Corporation, is warranted to the original retail purchaser against defects in material and workmanship for two years from the date of purchase if operated in accordance with Wagner’s printed...

What is a difference between Control Series and FLEXiO Series?

The Control Series Sprayers are for staining and finishing small to medium sized projects and are capable of spraying low viscosity coatings. The FLEXiO Series Sprayers offer a consistent finish on a wide range of interior...

Can I spray paint with the Control Series?

Some Control Spray units are able to spray some thinned latex paints. They are: Paint & Primer in One and primer are not recommended to be used in the Control Series.

Can I spray oil base products?

The Control series will spray both water and oil-based coatings. Do not spray or clean with liquids having a flash point of less than 100ºF (38ºC). Flash point is the temperature at which a fluid can...

What should I use to clean my sprayer?

Warm, soapy water for water-based materials; mineral spirits for oil-based materials, along with a soft bristle brush and a rag. Always flush with clean water after the mineral spirits. Always check the back of the paint...

Where can I get parts for my Control Series?

Parts can be purchased through online distributors, Wagner Online at www.wagnerspraytech.com or by calling us directly at 1-800-328-8251.

What is the warranty on the Control Series?

Can the Power Painter/Stainer be used indoors?

The Power Painters/Stainer is not recommended for spraying indoors.

Do I need to thin the material?

Thinning the material may not be necessary if it has been properly mixed, strained through a paint strainer, and you have the correct tip size.

What is the PSI (Pound per square inch) and tip size for the EZ-Tilt Power Painters?

The pressure is about 2,000-2,500PSI. The sprayer has dual orifice technology.

Can I use Power Painters/Stainer with 5 gallon bucket?

The EZ-Tilt Power Painters/Stainer will work with the 5 gallon bucket of paint with the remote suction set assembly which may need to be purchased separately.

How should I clean my Power Painters/Stainer?

Use the appropriate cleaning solution (warm, soapy water for latex materials; mineral spirits for oil-based materials). Always check the back of the paint container for appropriate cleaning solution.

Can the Power Painters/Stainer be used with 220volt?

These sprayers cannot be used with 220volt, it is rated for 110volt only. If you need a 220volt sprayer you can find a dealer or see our 220volt Wagner version.

Where can I get parts for my Power Painter/Stainer?

Parts can be purchase through online distributors, Wagner Online or by calling us direct at 1-800-328-8251.

What is the warranty on the Power Painters/Stainers?

This product, manufactured by Wagner, is warranted to the original retail purchaser against defects in material and workmanship for one year from date of purchase. This warranty does not cover damage resulting from improper use, accidents,...

What is the difference between the Smart Flow Roller, and the PaintStick EZ Roller?

The SMART Flow Roller has the convenience of being operated in two ways: battery operated or it has a manual trigger that directly feeds paint to the roller cover, eliminating the need for messy paint trays....

What type of projects can I use the Smart Flow Roller and the PaintStick EZ Roller for?

These rollers are perfect for any sized wall, ceiling, or deck projects.

How much area can I cover with the Smart Flow Roller and the PaintStick EZ Roller?

The Smart Flow Roller and the PaintStick EZ Roller reservoir holds up to 22fl. oz. of paint which will cover up to 70 sq. ft. in a single fill.

Can I draw paint directly out of the paint can?

The Earlex 3700, Earlex 5700 and the FLEXiO series cannot draw from the paint can. If you have a larger project that requires you to draw out of a one or five gallon container then you...

Will any standard roller cover fit?

Standard roller covers will not work. You need one with the perforated holes inside. We manufacture them under the name Wagner, HomeRight or Titan.

What type of coatings can be used?

The rollers can be used with water and oil based coatings.

What do I use to clean my roller?

When cleaning, use the appropriate cleaning solution (warm, soapy water for latex materials; mineral spirits for oil-based materials). Always check the back of the paint container for the appropriate cleaning solution.

Will the Smart Edge roller work with the Smart Sidekick?

The Smart Edge roller itself does not, but you can buy the 3″ roller arm assembly (0530201A) and an adapter (0530217A) that will fit on the Sidekick, allowing you to do trim.

Can you use an extension with the Smart Sidekick?

Yes, it will accept any threaded standard extension pole.

If I use an extension with the Smart Sidekick how can I control the on/off switch on the handle?

When you are using an extension, you will need to press and release the handle button until paint appears through the roller cover. Start painting as normal, bringing the roller handle down, pressing and releasing the...

Is there an internal hose available for the Smart Sidekick?

There are no internal parts available for the Smart Sidekick.

Will the SMART SideKick work in a 220 volt outlet?

No, the SideKick is designed to work with standard North American 110 volt outlets.

Can I use paint in the Renuvo?

No, you can use water and oil-based stains only.

What should I use to clean my Renuvo?

What is the warranty on the Roller?

How do you remove the power cord from the Furno heat gun?

Once the cord is attached to the Furno heat gun it is designed to stay attached.

What is the difference between the FURNO series heat guns?

The FURNO 300 dual temperature heat gun is an affordable heat gun that can be used for dozens of applications that require heat. The FURNO 500 has 12 temperature settings from 150°F to 1200°F that can...

Are there any internal replacement parts for the Furno Series?

The FURNO Series heat tools do not have any internal replacement parts. If you’re having problems with your heat gun, contact Product Support.

Where can I get parts and accessories?

Parts can be purchase through online distributors, Wagner Online at www.wagnerspraytech.com or by calling us direct at 1-800-328-8251.

Can I get a case for my Furno heat gun?

Yes you can. You can give us a call at 1-800-328-8251

Will the Furno heat guns work in a 220 volt outlet?

The Furno heat guns are designed for use with 120volt 60hz current. If you need a sprayer for 220volt, you can find a dealer at this link https://www.wagner-group.com/en/consumer/service/service-for-consumers/servicenumbers-international/.

What is the warranty on the Furno Series?

This product is warranted against defects in material and workmanship following the date of purchase if operated in accordance with Wagner’s printed recommendations and instructions. This warranty does not cover any defects or damages caused by...

What is a difference between the 715 Steamer and the 915 Steamer?

A) The 715 Power Steamer is ideal for the quick and effective removal of all types of wallpaper. The steamer comes with a large 8″ x 11″ steam plate for large work areas and a small...

Do the parts on the 715 and the 705 steamers interchange?

The parts do not interchange.

Do the parts on the 715 steamer interchange with the 915 steamer?

No, the parts do not interchange.

How many PSI (bar) does the 905e/915e/925e Steamer have?

The 905e/915e/925e Steamer has 55 PSI (3.79 bar) maximum pressure.

How long does it take for the Steamer to heat up?

The 725 Steamer/Earlex Steam Generator will take approximately 12 minutes for the water tank to produce steam. A full container will operate for about 120 minutes. When you turn the 905e/915e/925e Steamer switch to the on...

What temperatures does the steamer operate at?

The Steamer operates at approximately 212 degrees F or 100 degrees C.

Where can I get parts and accessories?

Parts can be purchased through online distributors, Wagner Online or by calling us direct at 1-800-328-8251.

What is the warranty on the Steamer?

This product is warranted to the original retail purchaser against defects in material and workmanship for one year from the date of purchase. This warranty does not cover damage resulting from improper use, accidents, user’s negligence,...

What surfaces can the PaintEATER be operated on?

The PaintEATER can be used on solid wood, Masonite, siding, wood siding, concrete, and steel.

Will the PaintEATER work indoors?

We do not recommend using the Paint Eater indoors.

How long should the disc last?

A) Approximately: B) Exact square footage will vary depending on the condition of the surface and the amount of pressure applied to the disc. We suggest letting the tool do the work without applying any extra

Will other manufacturers discs work on the PaintEATER?

This unit will only accommodate the Wagner Painter Eater disc, other discs will not work and are not safe to use.

Can I strip lead-based paints with this unit?

No, we do not recommend stripping lead based paint with the PaintEATER.

Where can I get replacement discs?

Discs can be purchased at certain retailers, through online distributors, at Wagner online or by calling us directly at 1-800-328-8251.

Will the PaintEATER work in a 200 volt outlet?

No, the Paint Eater is designed to work with standard North American 110-volt outlets. We don’t recommend using a power converter as it will damage the tool motor.

What is the warranty on the Paint EATER?

The factory warranty on the Paint Eater is one year from the date of purchase for manufacturing defects. Detailed Warranty information is available in the owner’s manual.

What finishes can the PowerTex be used to create?

Orange peel, knockdown and popcorn acoustical ceiling.

How thick should the wall compound mix be?

We suggest the thickness of pancake batter.

Can I spray paint or primer with the PowerTex?

No, it will not spray paint or primer

Can I create a heavy stucco appearance with the PowerTex?

Yes you can with multiple heavy applications and the correct troweling technique.

Can the PowerTex be used to spray texture material on the ceiling?

Yes, you can. By turning the hopper forward you will have the perfect angle to spray a ceiling.

Where can I get parts?

Parts can be purchased through online distributors, Wagner online at www.wagnerspraytech.com or by calling us directly at 1-800-328-8251.

Will the PowerTex work in a 220 volt outlet?

No, the PowerTex is designed to work with standard North American 110 volt outlets.

What is the warranty on the PowerTex?

Are other needle/tip sizes available?

Yes, there are various size tips that are available. Included with the sprayer: Available separately as a kit:

Are other needle/tip sizes available?

Yes, there are various size tips that are available. Included with the sprayer: Available separately:

Can I clean the filter on my sprayer?

After each use, you should inspect the air filter in the turbine to see if it is dirty. Dust and particles may be able to be rinsed out with water. If it is excessively...

Can I draw out of 1 or 5 gallon paint container?

The Smart Flow Roller and the PaintStick EZ Roller can draw paint out of a one gallon container. An additional accessory adapter will be needed for the five gallon container. The SMART Sidekick Roller can be...

Can I leave material in the sprayer overnight?

To keep the sprayer in tip top shape we recommend cleaning the sprayer after every use. However, there may be times when you need to finish your project the next day. In that case you can...

Can I test my sprayer with water?

Yes, you can and you should. There is a bit of a learning curve, so testing with water first is a great way to make sure the sprayer is working properly and it’s cheaper to experiment...

Can I test my sprayer with water?

Yes, you can and you should. Just spray into the air to see the pattern being created. There is a bit of a learning curve, so testing with water first is a great way to make...

Can I use automotive paint?

Absolutely, you can use both thinned water and oil-based automotive paints. This sprayer will not give you a showroom-like finish. Do not spray or clean with liquids having a flash point of less than 100ºF (38ºC)....

Can I use automotive paint?

Absolutely, you can use both thinned water and oil-based automotive paints. To spray lacquer material replace the cup with part #L0190A.

Site Search

Search

Filters

Type

Product Category

Product Series

Promotion

Difficulty

Project Type

Product

Video Type

Sort By

What is the difference between an airless sprayer and an HVLP sprayer?

What is the difference between the FLEXiO 570/590 and the FLEXiO 2000/3000?

What is the difference between the FLEXiO 2500/3500 and the FLEXiO 4000/5000?

Why does air continuously come out when I turn my sprayer on?

What is the nozzle size?

What is the Detail finish nozzle used for?

What types of coatings can be sprayed through the FLEXiO series?

Do I have to thin the material?

What should I use to clean my FLEXiO sprayer?

Is the FLEXiO series recommended for indoor and outdoor use?

Can I spray the ceiling with the FLEXiO sprayers?

Can the FLEXiO series be used with 220volt?

Where can I get parts for my FLEXiO series?

What is the warranty on the FLEXiO series?

What is the difference between the FLEXiO 2000/3000 and the FLEXiO 2500/3500?

What does HEA mean?

Can HEA sprayers be used indoors and outdoors?

What spray tips are compatible with the HEA sprayers?

Can you use extensions with the HEA sprayers?

What is the maximum length of spray hose that I use on the HEA sprayers?

Is there a filter and/or swivel available for the HEA sprayers?

Is there a roller attachment available for the HEA sprayers?

Where can I get parts or accessories for the HEA sprayers?

What is light household oil?

What types of coatings can be sprayed through the HEA sprayers?

Do I need to thin the material?

Can I use a generator with the HEA sprayers?

Can I use the HEA sprayer to paint my car?

Can the HEA sprayer be used with 220volt?

Can the HEA sprayers be used with a 5 gallon bucket?

What is the warranty on the HEA sprayers?

What is a difference between Control Series and FLEXiO Series?

Can I spray paint with the Control Series?

Can I spray oil base products?

What should I use to clean my sprayer?

Where can I get parts for my Control Series?

What is the warranty on the Control Series?

Can the Power Painter/Stainer be used indoors?

Do I need to thin the material?

What is the PSI (Pound per square inch) and tip size for the EZ-Tilt Power Painters?

Can I use Power Painters/Stainer with 5 gallon bucket?

How should I clean my Power Painters/Stainer?

Can the Power Painters/Stainer be used with 220volt?

Where can I get parts for my Power Painter/Stainer?

What is the warranty on the Power Painters/Stainers?

What is the difference between the Smart Flow Roller, and the PaintStick EZ Roller?

What type of projects can I use the Smart Flow Roller and the PaintStick EZ Roller for?

How much area can I cover with the Smart Flow Roller and the PaintStick EZ Roller?

Can I draw paint directly out of the paint can?

Will any standard roller cover fit?

What type of coatings can be used?

What do I use to clean my roller?

Will the Smart Edge roller work with the Smart Sidekick?

Can you use an extension with the Smart Sidekick?

If I use an extension with the Smart Sidekick how can I control the on/off switch on the handle?

Is there an internal hose available for the Smart Sidekick?

Will the SMART SideKick work in a 220 volt outlet?

Can I use paint in the Renuvo?

What should I use to clean my Renuvo?

What is the warranty on the Roller?

How do you remove the power cord from the Furno heat gun?

What is the difference between the FURNO series heat guns?

Are there any internal replacement parts for the Furno Series?

Where can I get parts and accessories?

Can I get a case for my Furno heat gun?

Will the Furno heat guns work in a 220 volt outlet?

What is the warranty on the Furno Series?

What is a difference between the 715 Steamer and the 915 Steamer?